Masonry repair
Sweep & inspection
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Gas Fireplace Repair Across Wekiwa Springs
Gas fireplace repair in Wekiwa Springs typically runs $150 – $400 for common fixes like thermocouple replacement or pilot assembly work, and $600 – $1,600 if your flue liner needs relining. We serve the whole Wekiwa Springs area with background-checked techs who show up with a camera scope, not a clipboard full of upsell recommendations. If your fireplace is acting up, call (904) 822-8172 and you’ll get a live person, not a voicemail loop.
Wekiwa Springs has a specific problem other nearby cities don’t share at the same scale: homes built from the 1970s through the 1990s often run gas fireplaces through original prefabricated metal chimneys that were never designed to last this long. Humidity from the Wekiva River basin accelerates rust, and cool winter nights mean these units actually get used. That combination means we see flue liner failures here more often than almost anywhere else we work.
Why Hadley Chimney Orlando Is Wekiwa Springs’s Preferred Gas Fireplace Repair Company
Founded in 2003, Hadley Chimney Orlando has spent more than two decades working on exactly the kind of chimneys Wekiwa Springs homes have: original prefab metal units from the 1970s, 80s, and 90s with rust-prone liners and dampers that seize in the humid air. Cory Mitchell leads our team, and the standard he sets is simple: every repair gets a written price before work starts, a written guarantee, and photo documentation of what we actually did. No exceptions.
Homeowners off Wekiva Springs Road, in the neighborhoods around Sweetwater West and the older sections near the state park, call us because we show what’s inside the flue before recommending anything. If the liner is fine, we say so. If it’s rusted through, you’ll see the camera footage yourself. That’s the Relay Visibility Guarantee: live arrival tracking, before-and-after photos, and digital invoicing on every job. Part of the Relay Home Co. family, we’re held to The Relay Standard on every visit.
Styles & brands we work with




Our Gas Fireplace Repair Services in Wekiwa Springs
Flue Liner Inspection and Relining
The humid subtropical climate in Wekiwa Springs means moisture sits inside metal flues longer than it does in drier parts of the state. Over years, that moisture corrodes the thin metal liner inside your prefab chimney. We scope every liner with a camera before recommending relining, and if the metal is gone, you’ll see the holes with your own eyes. We reline with HeatShield ceramic compound or DuraFlex flexible liner systems, both built for gas exhaust.

Damper Repair and Replacement
Dampers in Wekiwa Springs homes seize up from rust, often locking partially open. That lets conditioned air escape in summer and can allow exhaust to backdraft into the living space in winter. We repair or replace the damper assembly and show you the old part before we install anything. It’s a $150 – $350 job in most cases here, and we carry common replacement parts for the prefab brands found throughout this area.

Chimney Cap Installation
Rain and humidity from storms rolling through the Wekiva basin get into flues through missing or corroded caps. A proper chimney cap keeps water out, blocks debris, and still vents exhaust correctly. If your cap is missing or rusted through, we install Copperfield or Olympia Chimney caps sized to your existing prefab system. This is one of the cheapest repairs that prevents the most expensive problems later.

Gas Log Set and Burner Service
Vented gas logs in Wekiwa Springs homes sit in fireboxes that were originally built for wood. The transition from wood to gas leaves behind creosote, the flammable tar residue from old wood fires. When the gas burner heats that residue, it melts and can block the flue. We clean the firebox, check the burner ports, and verify the gas valve and thermocouple are operating correctly. If the burner is shot, we source replacements through trade suppliers, not big-box clearance aisles.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wekiwa Springs
We work on gas fireplaces and chimneys built with parts from the brands contractors actually used in this area: Olympia Chimney, Famco, Copperfield, and DuraFlex. Because so many Wekiwa Springs homes have original prefab systems from the 70s through the 90s, we keep common replacement components on our trucks. That means fewer return trips and faster turnaround. When a part isn’t on the truck, we get it sourced through established trade channels, not whatever’s cheapest online.
See the difference
Before
After
Before
After
Before
AfterCommon Gas Fireplace Repair Problems We See in Wekiwa Springs Homes
- Rusted-out prefab metal flue liners. Original liners in 1970s – 1990s chimneys corrode from humidity, causing gas exhaust leaks and poor draft. Most homeowners never know until we scope it.
- Corroded dampers that seize open or closed. This leads to conditioned air loss during Wekiwa Springs summers or backdrafting gas fumes into the home during winter cold snaps.
- Creosote tar glaze left from old wood burning. When a gas insert is installed in a firebox that previously burned wood, leftover creosote melts and blocks the flue. We clean it out before it becomes a fire hazard.
- Cracked crowns and failed flashing from moisture intrusion. Humidity-driven water damage around the firebox shows up as rust streaks, staining, and in severe cases, structural rot around the chase top.
Pricing for Gas Fireplace Repair in Wekiwa Springs, FL
Most gas fireplace repairs in Wekiwa Springs run $150 – $400. Thermostat or thermocouple replacement starts around $150, pilot assembly repair runs $200 – $350, and damper replacement typically lands between $150 and $350. Flue liner inspection with camera scope is $99, and if we find rust-through, relining ranges from $600 – $1,600 depending on the flue length and whether you choose HeatShield ceramic or a DuraFlex flexible liner. Chimney cap installation runs $250 – $450. Every job includes a written price before we start, a written guarantee on the repair, and a free second visit if the repair fails within 365 days. Call (904) 822-8172 for an exact quote.
We Also Serve Cities Near Wekiwa Springs
Our Gas Fireplace Repair team covers all of Wekiwa Springs plus the nearby communities of Orlando, Orlovista, Pine Hills, and Sanford. If you’re just outside the Wekiwa Springs boundary, Wekiwa Springs is still our home base for this area and we’re minutes from your door.
Serving Wekiwa Springs, FL - Our Local Coverage Area
We’re based in the Wekiwa Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gas Fireplace Repair in Wekiwa Springs
Because the original prefabricated metal chimneys installed in Wekiwa Springs homes from the 1970s through the 1990s were never designed for 30-plus years of Florida humidity. Moisture from the air and rain enters the flue, sits on the thin metal liner, and slowly eats through it. Wood burning accelerates creosote buildup, but rust happens regardless. The only way to know if yours is rusted is a camera scope inspection. Call (904) 822-8172 to schedule one.
Yes. We do exactly this all the time in the older sections of Wekiwa Springs off Wekiva Springs Road and around the state park. The key is checking the flue liner first. Many converted fireplaces still have original prefab flues that were never relined. If the liner is intact, we clean out any leftover creosote and verify the gas connections. If it’s rusted through, we reline before you use the fireplace again. Estimates are free.
Flue liner failure. Wekiwa Springs has an unusually high concentration of original prefab chimneys from the 1970s – 1990s, and those thin metal liners rust out from humidity. We recently serviced a gas fireplace in the older section of Wekiwa Springs off Wekiva Springs Road where the homeowner’s prefab chimney had a rusted flue liner and a corroded damper assembly. Our tech scoped the flue, showed the homeowner the camera footage, and replaced the liner with a HeatShield system, restoring proper draft and eliminating the risk of carbon monoxide backdraft.
You won’t know until someone scopes it with a camera. Visible signs include rust-colored staining on the chase exterior, water in the firebox after rain, a strong gas smell when the fireplace runs, or a pilot that won’t stay lit. But plenty of rusted liners show no external signs at all. That’s why we never recommend relining without camera evidence you can see yourself. Book a scope inspection by calling (904) 822-8172.
Yes, especially if your home was built between the 1970s and 1990s with an original prefab chimney. Rust doesn’t care how often you use the fireplace. Humidity works on the metal liner year-round. A quick camera inspection confirms whether the liner is still safe, and if it’s fine, you’re done worrying. No upsell, no lecture. Call (904) 822-8172 and we’ll schedule a time that works.
Written by Cory Mitchell, Owner at Hadley Chimney Orlando, serving Wekiwa Springs with gas fireplace repair backed by written guarantees since 2003.