Famco Gas Fireplace Repair Nationwide

Famco Gas Fireplace Repair in Orlando: What to Know First

We repair Famco gas fireplaces throughout Orlando, and most jobs are done in a single visit. A typical Famco repair runs $140 – $420 depending on whether it’s a thermocouple, pilot assembly, valve, or wiring issue, and we give you a written price before any work starts. If you own a Famco unit and it’s acting up, this page tells you exactly what’s likely wrong, what it costs, and how we handle the fix. Call (904) 822-8172 and a live person answers, day or night. As an independent Famco service provider, we’re not tied to the manufacturer’s service network, which means we show up faster and fix what’s actually broken, not what a warranty playbook says to replace first.

Call (904) 822-8172

How Famco Products Fail – and How We Fix Them

Famco built a lot of direct-vent and B-vent gas fireplaces that found their way into Orlando homes in the late ’90s through the mid-2000s. They’re solid units overall, but every brand has its patterns. Here’s what we actually see in the field.

• Thermocouple fatigue in the FDV series. The Famco FDV direct-vent line runs a standing pilot, and after 8 – 12 years the thermocouple drifts out of spec. The symptom is a fireplace that lights but won’t stay lit when you release the knob. We replace the thermocouple, verify millivolt output, and you’re back running. Parts cost is low, usually under $60.
• Pilot orifice clogging in the B-Vent Classic line. Orlando’s humidity works against gas appliances year-round, and Famco’s older B-vent pilots had a narrower orifice than most competitors. A slightly dirty gas supply or a humid season can leave enough residue to starve the pilot. We clean or replace the orifice and confirm the pilot flame wraps the thermocouple the way it should. This is the most common Famco issue we see from Delaney Park to College Park.
• Valve coil burnout on the Famco Premium gas valve. When the valve clicks but the burner never fires, homeowners often assume the whole unit is dead. In most cases it’s a failed solenoid coil, not the valve body. We test coil resistance, replace the bad coil with an OEM-spec part, and the fireplace fires normally again. That diagnosis saves Famco owners hundreds over a full valve replacement.
• Wiring corrosion at the limit switch on direct-vent models. Famco’s limit switches sit close to the firebox, and over time the wire terminals corrode from heat cycling and Florida moisture. The unit will fire, then shut down randomly. We replace the terminal connections, test the switch trip point, and resecure the wiring harness. Intermittent shutdown is the symptom that confuses most owners, but the fix is straightforward.
• Glass seal degradation on the Famco Bay View series. If you smell a faint gas odor near the unit when it’s running, the glass gasket has likely lost its seal. Famco Bay View models from the 2000s used a flat rope gasket that compresses over time. We replace the gasket, re-seat the glass, and run a leak check on every joint. This is a safety repair we never defer.

Our Famco Gas Fireplace Repair Process

Here’s exactly what happens when you book a Famco repair with us, from the first call to the final test.

1. 1
   You call and talk to a person. We answer live 24/7, ask what the fireplace is doing, and schedule a window that works for you. You’ll know who’s coming and when, with live arrival tracking the day of.
2. 2
   Diagnostic walkthrough with photos. Our tech arrives, inspects the unit, and pulls out a phone to show you exactly what’s wrong before quoting anything. Cory Mitchell has a habit of texting customers photos of the failed part with a plain-language explanation, and that’s the standard for the whole crew.
3. 3
   Written price, your call. We give you a written repair quote before we begin. OEM Famco parts when available and sensible, quality aftermarket parts when the OEM equivalent is overpriced or discontinued. You decide.
4. 4
   Repair and cleaning in one trip. We fix the issue, clean the pilot assembly, check burner airflow, and clear any soot or debris that builds up in Orlando’s humid conditions. The fireplace doesn’t just work again, it works right.
5. 5
   Test and verification. We fire the unit, cycle it repeatedly, and verify gas pressure at the manifold matches the manufacturer’s spec plate on your Famco unit.
6. 6
   Guarantee in writing. Every repair carries our 365-Day Done Right Promise. If it fails within 365 days, we come back and make it right for free. No fine print, no argument.

What Famco Gas Fireplace Repair Costs in Orlando

Here’s the honest math on Famco repair pricing in the Orlando market.

• Thermocouple replacement: $140 – $220
• Pilot orifice cleaning or replacement: $120 – $190
• Valve coil replacement: $180 – $320
• Limit switch or wiring repair: $150 – $260
• Glass gasket replacement on a Bay View: $210 – $350

What moves the price is mostly parts availability. Some Famco components are simple and universal, but older Bay View glass gaskets and certain direct-vent parts are discontinued, which pushes you toward a higher-grade aftermarket alternative. You’ll know the number before we touch a single screw. Call (904) 822-8172 for a free estimate, and we’ll give you real numbers, not a “well, it could be…” guess.

Why Orlando Homeowners Call Hadley Chimney Orlando for Famco Work

We’ve been doing chimney and gas fireplace work since 2003, and Famco units have been a steady part of that for over two decades. Our techs know these units by their failure patterns, not just by their model numbers, which means faster diagnoses and fewer return visits. Every job includes live arrival tracking, before-and-after photo documentation, and a written price before work begins, which is the Relay Visibility Guarantee in action. If a Famco part isn’t available, we work with materials from DuraFlex, HeatShield, and Gelco to keep your fireplace safe and running. And when the unit’s beyond sensible repair, we’ll say so plainly, with photos to prove it, rather than selling you a patch job that fails in March.

FAQs