Masonry repair
Sweep & inspection
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across St. Cloud
Chimney repair in St. Cloud usually means one of two things: a flashing leak or crown damage, and both are fixable without a full rebuild in most cases. We’re Hadley Chimney Orlando, and our Chimney Repair team works in St. Cloud neighborhoods from the historic downtown to the newer subdivisions off Narcoossee Road. If you’ve noticed water staining on your ceiling near the fireplace or crumbling brick on the outside of your chimney, call (904) 822-8172 and we’ll walk you through what we’re likely to find before anyone climbs a ladder.
Why Hadley Chimney Orlando Is St. Cloud’s Preferred Chimney Repair Company
St. Cloud homeowners deal with a specific headache: chimneys built before modern liners existed. The bungalows and ranch homes from the 1920s through the 1950s have masonry stacks with clay tile flues or no liner at all, and Florida’s humidity punishes them year-round. We know what to look for before we recommend anything, because we document every crack with a camera and show you the footage. That’s the Relay Visibility Guarantee: a written price before work starts, before-and-after photos, and live arrival tracking on every job. No vague verbal quotes, no upsell you can’t see for yourself.
Cory Mitchell and the team have spent over two decades in this trade, and the calls we get from St. Cloud follow a pattern. Water stains on the ceiling. Flaking brick on the chimney exterior. A damper that’s rusted solid. Homeowners want to know if it’s a $400 flashing fix or a $4,000 rebuild, and we’d rather show you than tell you. Every repair carries our 365-Day Done Right Promise: a written guarantee and a free second visit if the repair fails.
Styles & brands we work with
Chimney Flashing Repair in St. Cloud
Chimney flashing repair is the most common fix we handle in St. Cloud, and it’s where DIY attempts usually fall apart within one rainy season. Flashing is the metal that seals the joint where your chimney meets the roofline. On older St. Cloud bungalows, that joint is a weak point because the original masonry step design wasn’t integrated with modern roofing materials. A typical flashing repair in St. Cloud runs $400 – $900 depending on how much of the existing metal has to be removed and replaced.
What We Check Before Touching Flashing
We don’t caulk over old, corroded flashing and call it done. Our techs cut out the failed sections, check the mortar bed underneath, and install new metal that’s properly counter-flashed into the brick. A flashing job done wrong holds water against the chimney instead of shedding it, and that water finds its way into your ceiling.
The Rainy Season Test
St. Cloud’s summer rains are relentless. If your flashing leaks, you’ll see staining within weeks of the first heavy storm. The fix is rarely just sealant. Most homes we visit in St. Cloud need at least partial flashing replacement where the old galvanized metal has rusted through from decades of humidity. We use Copperfield flashing accessories on these jobs, because the material is built for the wet-dry cycles Florida throws at it.
Chimney Crown Repair in St. Cloud
Chimney crown repair is the other half of St. Cloud’s leak problem. The crown is the concrete cap on top of your chimney, and on older St. Cloud homes it’s often cracked, spalled, or missing the proper overhang that sheds water away from the brick. A cracked crown lets rain run straight down the inside of the flue, which is how you get water in the firebox and rusted dampers. Crown repair in St. Cloud typically runs $500 – $1,200, depending on whether we’re resurfacing or rebuilding.
Why Patches Fail on 1950s Ranch Homes
We see a lot of ranch homes around St. Cloud where someone patched the crown with a hardware store sealant. The problem is that a crown needs a proper overhang and a drip edge. Without one, water clings to the underside of the crown and wicks into the brick. Decades of heavy summer rains on a spalled crown means the damage is already inside the mortar joints before any visible crack leaks.
Rebuilding With the Right Mix
When the crown’s too far gone to resurface, we rebuild it with a mix designed for Florida’s expansion and contraction cycles. We add a proper overhang and seal the top of the brick below it. We’ve done this on chimneys in the older neighborhoods around Michigan Avenue when homeowners thought they needed a full rebuild. The crown and flashing fixes together stopped the leak. The rebuild wasn’t necessary.
Trusted Brands We Service in St. Cloud
We stock parts and materials our St. Cloud customers actually need, not whatever’s cheapest on the truck. That means DuraFlex stainless steel liner systems for unlined chimneys, Olympia Chimney caps and dampers, and Copperfield flashing accessories. We don’t have to special-order these from a distributor and reschedule your repair. Most jobs we do in St. Cloud are completed with materials already in our inventory, which means your repair gets done in one visit instead of two.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in St. Cloud Homes
- Spalling brick on unlined chimneys. Older St. Cloud homes, especially in the historic downtown, have unlined brick flues that absorb moisture from every summer storm. The brick face flakes away, and the structural core of the chimney starts to weaken from the inside out.
- Clay tile flue cracks. Decades of occasional low-temperature fires create thermal stress on clay tile liners. A standard sweep won’t catch hairline fractures. Only a Level 2 camera inspection shows what’s actually happening inside the flue.
- Rusted caps and dampers. St. Cloud’s humidity is unkind to metal. We replace more rusted-out chimney caps here than in drier markets, and a rusted damper is usually a sign that rain has been getting past the crown for years.
- Flashing that was never integrated. On 1920s – 1950s bungalows, roofers sometimes slather sealant over old flashing instead of cutting it out and replacing it properly. It holds for a few months, then leaks worse than before.
Pricing for Chimney Repair in St. Cloud, FL
Flashing repair in St. Cloud runs $400 – $900. Crown repair runs $500 – $1,200. Spalling brick repair, where we cut out damaged brick and replace it, runs $300 – $800 depending on how many bricks are involved. A full stainless steel liner installation for an unlined chimney starts around $2,500 and goes up from there. Each quote is a written price before any work starts, and every repair gets a written guarantee. Call (904) 822-8172 and we’ll schedule a visit, camera-inspect what’s actually wrong, and give you the number with no surprises at the door.
We Also Serve Cities Near St. Cloud
Hadley Chimney Orlando handles St. Cloud repairs throughout the area. We also work regularly in Orlando, Orlovista, Pine Hills, and Sanford. If you’re just outside St. Cloud and not sure whether we cover your street, call us. A live person answers 24/7 and will tell you directly whether we can get to you.
Serving St. Cloud, FL - Our Local Coverage Area
We’re based in the St. Cloud area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in St. Cloud
The only way to know is a Level 2 camera inspection, which we run down the flue and record in high resolution. You’ll see the footage yourself before anyone recommends a liner or any other work. Call (904) 822-8172 to book the camera inspection and get an honest read on whether your chimney is a fire risk or can wait.
Crowns on St. Cloud ranch homes crack because they were poured without a proper overhang or drip edge, and patch compounds can’t fix that structural flaw. The water keeps wicking into the brick from underneath. A proper rebuild with the right mix and an overhang is the permanent fix, and it typically runs $700 – $1,200. Call (904) 822-8172 and we’ll show you exactly what’s failing on your crown.
You can, but most DIY flashing jobs on older St. Cloud bungalows fail within one rainy season because the original masonry step design requires counter-flashing that’s cut into the mortar joints, not just sealed over the top. We’ve re-done enough of these to know the pattern. If you want it fixed once, call (904) 822-8172 and we’ll do it right the first time.
Third-degree creosote is a hard, glazed layer of flammable tar that forms from low-temperature fires, which is exactly what St. Cloud’s mild winters produce. It’s a chimney fire waiting for a spark, and it often means the flue needs a chemical treatment, removal through aggressive sweeping, or in the worst cases a liner replacement. The cost depends on what the camera shows, and you’ll see that footage before any number is quoted. Call (904) 822-8172 for a camera inspection and a straight answer.
Older chimneys with clay tile liners are technically grandfathered in under existing codes, but the real question is whether that clay liner is cracked, which most of them are after 70-plus years of thermal cycling. A cracked clay liner is a fire risk regardless of what the code says. We camera-inspect flues across St. Cloud and show you exactly whether your clay liner is holding up or needs a stainless steel replacement. Call (904) 822-8172 to schedule it.
If you’re in St. Cloud and your chimney is leaking, spalling, or just hasn’t been looked at in years, call (904) 822-8172. We’ll schedule a visit, run a camera through the flue, and show you exactly what’s going on before you pay for anything. Estimates are free, and the phone is answered by a real person every time.
Written by Cory Mitchell, Owner at Hadley Chimney Orlando, serving St. Cloud since 2003.